As of May 2018, Baker Electronix has closed. We are thankful to all who’ve purchased our products over the 15 years we were in business.
|
TSD/ATSD
(Tachometer Signal Divider)/(Adjustable-TSD)
Also Known as the Tachometer Adaptor
The ATSD module is essential for anyone who is installing an engine into a vehicle that was equiped with a tachometer designed for an engine with a different number of cylinder. The ATSD module divides, or multiplies, the tachometer signal's frequency. The TSD/ATSD also converts the single to a standard 0V to 12V pulse to operate your original stock tachometer. The ATSD comes with eight standard settings, that you can switch between.
Download the TSD/ATSD manual for more information.
The non-adjustable (TSD module) only comes with one setting that you must specify when you order. Download the TSD/ATSD manual for more information.
Features:
- Microcontroller based for reliability and accuracy
- Waterproof
- Reverse voltage protection in the event of incorrect power connections
- Short circuit protection on all inputs and outputs to 12V or ground
- Operating voltage from 8V to 25V
- Light weight (31g)
- Small package(5.4 cm x 3.5 cm x 1.5 cm)
- 12-Month Warranty from date of purchase against manufacturer defects
|
Back to Top
TSI
(Tachometer Signal Inverter)
The TSI module converts a standard 0 – 12v coil type tachometer signal into a 0 - 5v tachometer signal by inverting and reducing the input pulses. This module provides no frequency adapting, if frequency adapting is needed the TSD or ATSD are also available.
Features:
- Reverse voltage protection in the event of incorrect power connections
- Short circuit protection on all inputs and outputs to 12V or ground
- Waterproof
- Inverts signals from 0 Hz to 5,000 Hz (0 - 75,000 RPM with a V8)
- Low current (5 - 15mA)
- Indicator LED to confirm that module has power
- Works from 8V to 25V supply voltage
- Light weight (31g)
- Small package (5.4cm x 3.5 cm x 1.5cm)
- 12 month warranty from date of purchase against manufacturer defects
|
|
